June 8, 2021

If you’ve never had the opportunity to see a polka dots nail art before, you’re in for a treat.

You’ll need to do a few things.

First, get yourself a polkadot nail.

This is an extremely rare and expensive nail, and there are currently only about 1,000 of them in existence.

Next, you’ll need a nail polisher.

Polishers are like a paint brush, but they’re much more delicate.

You can make one by heating a small bottle of nail polish in a water bath, but that’s only a few steps.

You also need a flat-bottomed glass bottle.

That means you’ll have to be careful to avoid getting it too hot or the nail will be stuck.

Finally, you need a large, flat-plastic baggie that you can squeeze through a small opening in the side of the baggie to hold the polish.

Once you have your polish, you will need to carefully pull it out.

You’re going to need a few pieces of jewelry to get the most out of this technique.

You want to nail two pieces, or as many as you can.

You could go for a simple glittery glitter nail, but you’ll want to go for something more sparkly for the polka-dot effect.

The polka’s all about sparkle, and you’re going for something that’s easy to pick up, but also holds up to the elements.

For this tutorial, we’re going with a polisher made by American Nail Art.

Here’s how to make the polkart nail: 1.

Get a bottle of polish.

The bottle you pick up from your local drugstore will probably not be the best.

Make sure the bottle is about the size of a medium-sized handbag.

You don’t want to have to take the bottle out and pour it into the bag to apply polish.

A medium-size handbag will work fine.

2.

Start by applying your polish.

First of all, you want to start with a clean polish.

To do this, apply a small amount of polish to the inside of the bottle, and then start pulling the polish from the bottle.

You will need this step to make sure that your polish is really opaque.

Next you’ll take the polish out of the plastic baggie and put it in the bottle with the polkarot nail art.

You should be able to hold onto the polish for about 10 seconds before you need to pull it from the bag.

Once the polish is out of your bottle, you can pull it back in again to keep the polish in place.

The polish will continue to slide off the bottle until you stop pulling.

You may have to stop pulling the bottle a couple of times for the polish to dry.

Once it’s dry, you should be ready to begin polishing.

This will take about 10-15 minutes.

You won’t want this polish to get very dirty, but it’s better to wait until the polish has completely dried before polishing, since it will make it hard to remove if you accidentally pull the polish off.

3.

You need to keep polishing until the nail is completely dry.

You do not want the polish stuck in your nail or the polish on your nails.

Once your polish has dried, you have to remove the polish with a flat nail file.

You must apply the polish and then wait until your polish dries before removing it with a file.

The nail file can be a bit painful, so if you have a really small nail, try to get it in your hand as you polish.

You might also want to wear gloves while you’re polishing so that you don’t have to pull on the nail or your nail polish.

4.

Once polishing is done, you now have the polish that you need.

You just need to add some glitter to make it pop. If you don