The first thing you need to know about nail art is that it’s not for the faint of heart.
I’ve had plenty of nail art kits that cost $2,000 or more, but they all leave a lot to be desired.
Here’s how to do it right: Use a nail polish brush and a sharp, flat tool.
If you have a flat nail art brush, I recommend getting one that doesn’t bend at the edges.
I’m a big fan of the Jagger brush.
I love the flatness of the brush.
It also has a flat tip, so it’s a lot easier to hold the brush in one hand and paint on your nails in the other.
When you’re done, the brush should be shiny and clean.
You can use a second brush to add more sparkle to your nails.
This second brush will add more gloss, and it will also give you a more defined, finished look.
You’ll want to use your brush for about two to three strokes per square inch, so if you’re using the same color, you’ll want two different brushes.
You also want to work on your edges with your brush, so that the brush will be perpendicular to your nail and your nails will be flat.
I use a straight, long brush, but the Jagged brush has a little bit of a flatter, more curved tip, which is a nice touch.
To add some sparkle, I often add some glitter.
I think the best way to do this is to add a bit of color to your brush.
This is how I do it: Hold the brush just over your nail.
Push down on the bristles, making sure the brush is on your nail before you pull the bristls off.
You want to add some shine.
Apply glitter on your brush as you do the first step.
You’re going to want to apply glitter on the sides of your nails, but you’ll also want some color on the front of your nail to show that you’re working on your top two or three nails.
I like to start by doing a dab of glitter on one of the sides, then add more glitter on top.
Now you’ll probably want to paint the glitter a bit with the top two to four nails, because it will give your polish a nice shimmer.
You should see some glitter on each nail.
Now, add glitter to the bottom of your brush so that it looks like it’s glittering onto your nail while you’re painting it.
You might need to do two or even three coats of glitter.
Now add a little glitter on both sides of the nail.
You’ve got the polish, and you’ve got glitter on a flat surface, and now you’re ready to apply your top nails.
Let the polish dry completely.
You probably want it to be in a cool dry place for a few hours.
To apply your second coat of glitter, use a flat brush.
Let it sit on the nail for a while.
Now put your top three or four nails on top of your second top nail.
I usually do two coats of this glitter, then a third coat of this, and then a fourth coat.
If your top four nails are glittering, you should have two coats.
If not, you can wait until you get the glitter to dry.
Now apply your first top coat of polish.
This should be the most glittery you’ve ever done.
It’s not going to last as long as your first coat, but it will be better looking.
Once your polish is done, it’s time to put on your next coat.
Apply a second coat to the glitter.
If glitter is still glittering on your paintbrush, it may need to be reapplied with a nail polisher.
Apply another coat of your polish to the nail polish.
Repeat the process as many times as needed to make sure your nail polish is ready for your next project.
Here are some tips to make your nail art more professional: Use glitter nail art that’s very pigmented.
You don’t want a flat, glittery paint that doesn-t really work well on the nails.
Use a medium or large-size brush to apply a large amount of glitter onto your polish.
When glitter is applied to your polish, it can get very streaky.
So you might want to reapply your polish when you’re finished.
It can be a little tricky to get glitter to work, but if you’ve done this before, it shouldn’t be too difficult.
You could also apply your polish with a thin brush, or use a thin coat of nail polish remover.
For more tips on how to paint nail art nails, check out my guide to professional nail art.